Aplicaciones de la centrífuga geotecnica en la enseñanza de la mecánica de suelos aplicada
DOI:
https://doi.org/10.26507/rei.v16n32.1188Palabras clave:
civil engineering, applied soil mechanics, geotechnical centrifuge, teaching in geotechnicsResumen
En este artículo se presentan las características de la nueva centrífuga geotécnica de la Escuela Colombiana de Ingeniería Julio Garavito. Se presentan las capacidades instaladas, aplicaciones futuras y posibilidades que ofrece la nueva centrifuga como herramienta de enseñanza y aprendizaje en geotecnia. Esta centrífuga tiene un radio de 610mm y puede alcanzar una aceleración de 200 gravedades. La centrifuga tiene instalado un completo sistema de adquisición de datos con una capacidad de 12 sensores que permiten medir diferentes propiedades. Adicionalmente, la centrifuga cuenta con cinco consolidómetros edometricos como herramientas complementarias para la preparación de suelos finos. Las múltiples posibilidades en enseñanza de la mecánica de suelos aplicada usando la nueva centrifuga se basan en la visualización de los mecanismos de falla y deformaciones producidas por diferentes estructuras geotécnicas.
Descargas
Referencias bibliográficas
R. E. Taylor, Geotechnical centrifuge technology, CRC Press. 2003.
D. S. Kim, N. R. Kim, Y. W. Choo, and G. C. Cho, “A newly developed state-of-the-art geotechnical centrifuge in Korea,” KSCE J. Civ. Eng., vol. 17, no. 1, pp. 77–84, 2013, doi: 10.1007/s12205-013-1350-5.
C. W. W. Ng, “The state-of-the-art centrifuge modelling of geotechnical problems at HKUST,” J. Zhejiang Univ. Sci. A, vol. 15, no. 1, pp. 1–21, Jan. 2014, doi: 10.1631/jzus.A1300217.
J. Garnier et al., “Catalogue of Scaling Laws and Similitude Questions in Geotechnical Centrifuge Modelling,” Int. J. Phys. Model. Geotech., vol. 7, pp. 1-1-23–23, 2007, doi: 10.1680/ijpmg.2007.7.3.01.
D. White and W. Take, “GeoPIV : Particle Image Velocimetry ( PIV ) software for use in geotechnical testing,” 2002.
J. A. Black and C. S. D, “The development of a small scale geotechnical teaching centrifuge,” in Enhancing Engineering Higher Education, 2012, vol. 1, no. January, pp. 37–41, doi: 10.1201/b16200-19.
M. M. Dewoolkar, T. Goddery, and D. Znidarcic, “Centrifuge modeling for undergraduate geotechnical engineering instruction,” Geotech. Test. J., vol. 26, no. 2, pp. 201–209, 2003, doi: 10.1520/gtj11327j.
T. A. Newson, M. F. Bransby, and G. Kainourgiaki, “The use of small centrifuges for geotechnical education,” Proc., 4th Int. Conf. Phys. Model. Geomech., pp. 215–220, 2002.
U. El Shamy, T. Abdoun, F. McMartin, and M. A. Pando, “Integration of centrifuge testing in undergraduate geotechnical engineering education at remote campuses,” Eur. J. Eng. Educ., vol. 38, no. 3, pp. 268–280, 2013, doi: 10.1080/03043797.2013.794199.
A. F. Tessari and J. A. Black, “Development of a teaching centrifuge learning environment using mechanically stabilized earth walls,” in Physical Modelling in Geotechnics ICPMG 2018, 2018, vol. 1, no. July, pp. 545–550.
I. U. Khan and S. M. Bayton, “Learning through physical modelling observations in the Undergraduate Curriculum,” in Proceedings of the XVII ECSMGE-2019, 2019, pp. 1–7, doi: 10.32075/17ECSMGE-2019-0778.
J. A. Black and S. D. Clarke, “The development of a small-scale geotechnical teaching centrifuge,” in Enhancing Engineering Higher Education., 2012, pp. 37–41.
B. Caicedo, “Geotechnical centrifuge applications to foundations engineering teaching,” in Proc., 1st Int. Conf. on Geotechnical Engineering Education and Training, 2000, pp. 271–274.
V. Drnevich and W. Craig, “The Use of a Centrifuge in Geotechnical Engineering Education,” Geotech. Test. J., vol. 12, no. 4, p. 288, 1989, doi: 10.1520/GTJ10986J.
J. Wartman, “Geotechnical physical modeling for education: Learning theory approach,” J. Prof. Issues Eng. Educ. Pract., vol. 132, no. 4, pp. 288–296, 2006, doi: 10.1061/(ASCE)1052-3928(2006)132:4(288).
H. . Allersma, “Development of Miniature Equipment for a Small Geotechnical Centrifuge,” Transp. Res. Rec., vol. 1432, p. 99, 1994.
M. S. S. Almeida, J. R. M. S. Oliveira, H. P. G. Motta, M. C. F. Almeida, and R. G. Borges, “CPT and T-bar penetrometers for site investigation in centrifuge tests,” Soils and Rocks, vol. 34, pp. 79-88., 2011.
M. S. S. Almeida et al., “The geotechnical beam centrifuge at COPPE centrifuge laboratory,” in Physical Modelling in Geotechnics ICPMG 2014, 2015, vol. 1, pp. 271–277.
T. Carey, “A new shared miniature cone penetrometer for centrifuge testing,” in Physical Modelling in Geotechnics, vol. 1, CRC Press, 2018, pp. 293–298.
G. Madabhushi, Centrifuge Modelling for Civil Engineers. 2015.
G. Madabhushi, Centrifuge Modelling for Civil Engineers. CRC Press, 2017.
J. Garnier, “Modèles physiques en géotechnique Physical models in geotechnics Similitude en mécanique,” in Conférence Caquot, 2001, no. 1, p. 29.
M. Khari, K. A. Kassim, and A. Adnan, “Sand Samples’ Preparation Using Mobile Pluviator,” Arab. J. Sci. Eng., vol. 39, no. 10, pp. 6825–6834, 2014, doi: 10.1007/s13369-014-1247-8.
L. X. Garzón, B. Caicedo, M. Sánchez-Silva, and K. K. Phoon, “Physical modelling of soil uncertainty,” Int. J. Phys. Model. Geotech., vol. 15, no. 1, pp. 19–34, Mar. 2015, doi: 10.1680/ijpmg.14.00012.
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Se autoriza la reproducción total o parcial de los documentos publicados en la Revista siempre y cuando se cite la fuente y el autor.
Estadísticas de artículo | |
---|---|
Vistas de resúmenes | |
Vistas de PDF | |
Descargas de PDF | |
Vistas de HTML | |
Otras vistas |